Welcome to Asymetrix InfoAssistant
			      Trial Version

Welcome to Asymetrix InfoAssistant Trial Version!

This file contains important information.

We recommend the following system configurations:

- 8 MB of RAM required.  Recommended 16 MB
- 486 microprocessor running at 33MHz or faster 
- Approximately 30-35 MB free disk space for complete installation

Running the InfoAssistant Demonstration:

- Important: You must run on a VGA or greater display device that 
  that supports at least 256 colors. You must also use Small Fonts. Check 
  Display Control Panel settings to ensure you have correctly 
  configured your display device.

  If the appearance of the screen is not correct or if you receive
  this or any other any error messages when the demonstration is 
  launched, review the display device settings to make sure they 
  are correct.

- If you are running Windows 3.1 or Windows for Workgroups, you must
  install Microsoft Video for Windows, version 1.1e. This may be 
  done by running the setup procedure on the Trial Version CD-ROM,
  in Vfw11e/disk1/vfwsetup.exe.

  If you have not installed Video for Windows, you may receive the 
  following message:

     "The specified file cannot be played on the specified 
      MCI device.  The file may be corrupt, or not in the correct 
      format."

- No disk space required to run the InfoAssistant Demonstration.
  It is run completely from the CD-ROM.

- A sound card is not required, but is highly recommended!

After you have run the InfoAssistant Demonstration:

- Be sure to take advantage of the 30 day trial version of
  InfoAssistant on the CD. Install the version directly from 
  the demonstration, or click on the "Install InfoAssistant" icon
  in the "Asymetrix InfoAssistant Trial Version" program group.

- Be sure to read the InfoAssistant ReadMe file installed with 
  the product. It contains important information you will want
  to know to get the optimal benefit from your InfoAssistant 
  evaluation.

If you need help:

- Call Asymetrix Technical Support at (206) 637-1600, Monday 
  through Friday from 9am - 4pm Pacific time.

  Please be prepared to provide all relevant information 
  including any error messages, error codes, memory addresses, 
  or other information appearing on-screen when the problem 
  was encountered.  You will be asked to provide the specific steps
  leading to the problem.  Additionally, you may be asked to
  provide the contents of various system configuration files, such as the 
  AUTOEXEC.BAT, CONFIG.SYS, WIN.INI & SYSTEM.INI.