//=========================================================================== // // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE. // // Copyright (c) 1992 - 1997 Microsoft Corporation. All Rights Reserved. // //=========================================================================== // // filename edevdefs.h // // Ext Device (like a VCR) control interface parameter and value definitions // #ifndef __EDEVDEFS__ #define __EDEVDEFS__ #define ED_BASE 0x1000L // this is used to tell the device communications object which // physical communications port to use. #define DEV_PORT_SIM 1 #define DEV_PORT_COM1 2 // standard serial ports #define DEV_PORT_COM2 3 #define DEV_PORT_COM3 4 #define DEV_PORT_COM4 5 #define DEV_PORT_DIAQ 6 // Diaquest driver #define DEV_PORT_ARTI 7 // ARTI driver #define DEV_PORT_1394 8 // IEEE 1394 Bus #define DEV_PORT_USB 9 // Universal Serial Bus #define DEV_PORT_MIN DEV_PORT_SIM #define DEV_PORT_MAX DEV_PORT_USB // IAMExtDevice Capability Items: unless otherwise specified, these items return // OATRUE or OAFALSE. All return values are in pdwValue unless otherwise specified: #define ED_DEVCAP_CAN_RECORD ED_BASE+1L #define ED_DEVCAP_CAN_RECORD_STROBE ED_BASE+2L // for multitrack devices: // switches currently recording tracks off // and selected non-recording tracks into record #define ED_DEVCAP_HAS_AUDIO ED_BASE+3L #define ED_DEVCAP_HAS_VIDEO ED_BASE+4L #define ED_DEVCAP_USES_FILES ED_BASE+5L #define ED_DEVCAP_CAN_SAVE ED_BASE+6L #define ED_DEVCAP_DEVICE_TYPE ED_BASE+7L // returns one of the following: #define ED_DEVTYPE_VCR ED_BASE+8L #define ED_DEVTYPE_LASERDISK ED_BASE+9L #define ED_DEVTYPE_ATR ED_BASE+10L #define ED_DEVTYPE_DDR ED_BASE+11L #define ED_DEVTYPE_ROUTER ED_BASE+12L #define ED_DEVTYPE_KEYER ED_BASE+13L #define ED_DEVTYPE_MIXER_VIDEO ED_BASE+14L #define ED_DEVTYPE_DVE ED_BASE+15L #define ED_DEVTYPE_WIPEGEN ED_BASE+16L #define ED_DEVTYPE_MIXER_AUDIO ED_BASE+17L #define ED_DEVTYPE_CG ED_BASE+18L #define ED_DEVTYPE_TBC ED_BASE+19L #define ED_DEVTYPE_TCG ED_BASE+20L #define ED_DEVTYPE_GPI ED_BASE+21L #define ED_DEVTYPE_JOYSTICK ED_BASE+22L #define ED_DEVTYPE_KEYBOARD ED_BASE+23L // returns mfr-specific ID from external device. #define ED_DEVCAP_EXTERNAL_DEVICE_ID ED_BASE+24L #define ED_DEVCAP_TIMECODE_READ ED_BASE+25L #define ED_DEVCAP_TIMECODE_WRITE ED_BASE+26L // used for seekable non-timecode enabled devices #define ED_DEVCAP_CTLTRK_READ ED_BASE+27L // used for seekable non-timecode enabled devices #define ED_DEVCAP_INDEX_READ ED_BASE+28L // returns device preroll time in current time format #define ED_DEVCAP_PREROLL ED_BASE+29L // returns device postroll time in current time format #define ED_DEVCAP_POSTROLL ED_BASE+30L // returns indication of device’s synchronization accuracy. #define ED_DEVCAP_SYNC_ACCURACY ED_BASE+31L // returns one of the following: #define ED_SYNCACC_PRECISE ED_BASE+32L #define ED_SYNCACC_FRAME ED_BASE+33L #define ED_SYNCACC_ROUGH ED_BASE+34L // returns device’s normal framerate. #define ED_DEVCAP_NORMAL_RATE ED_BASE+35L // returns one of the following: #define ED_RATE_24 ED_BASE+36L #define ED_RATE_25 ED_BASE+37L #define ED_RATE_2997 ED_BASE+38L #define ED_RATE_30 ED_BASE+39L #define ED_DEVCAP_CAN_PREVIEW ED_BASE+40L #define ED_DEVCAP_CAN_MONITOR_SOURCES ED_BASE+41L // indicates implementation allows testing of methods/parameters by // setting the hi bit of a parm that makes sense - see individual methods // for details. #define ED_DEVCAP_CAN_TEST ED_BASE+42L // indicates device accepts video as an input. #define ED_DEVCAP_VIDEO_INPUTS ED_BASE+43L // indicates device accepts audio as an input. #define ED_DEVCAP_AUDIO_INPUTS ED_BASE+44L #define ED_DEVCAP_NEEDS_CALIBRATING ED_BASE+45L #define ED_DEVCAP_SEEK_TYPE ED_BASE+46L // returns one of the following: #define ED_SEEK_PERFECT ED_BASE+47L // indicates device can execute seek // within 1 video frames without signal // break (like a DDR) #define ED_SEEK_FAST ED_BASE+48L // indicates device can move pretty quick // with short break in signal #define ED_SEEK_SLOW ED_BASE+49L // seeks like a tape transport #define ED_POWER_ON ED_BASE+50L #define ED_POWER_OFF ED_BASE+51L #define ED_POWER_STANDBY ED_BASE+52L #define ED_ACTIVE ED_BASE+53L #define ED_INACTIVE ED_BASE+54L #define ED_ALL ED_BASE+55L #define ED_TEST ED_BASE+56L // IAMExtTransport Capability Items: unless otherwise specified, these items return // OATRUE or OAFALSE. All return values are in pdwValue unless otherwise specified: #define ED_TRANSCAP_CAN_EJECT ED_BASE+100L #define ED_TRANSCAP_CAN_BUMP_PLAY ED_BASE+101L // variable speed for synchronizing #define ED_TRANSCAP_CAN_PLAY_BACKWARDS ED_BASE+102L // servo locked for use during an edit #define ED_TRANSCAP_CAN_SET_EE ED_BASE+103L // show device’s input on its output #define ED_TRANSCAP_CAN_SET_PB ED_BASE+104L // show media playback on device’s output #define ED_TRANSCAP_CAN_DELAY_VIDEO_IN ED_BASE+105L // transport can do delayed-in video edits #define ED_TRANSCAP_CAN_DELAY_VIDEO_OUT ED_BASE+106L // transport can do delayed-out video edits #define ED_TRANSCAP_CAN_DELAY_AUDIO_IN ED_BASE+107L // transport can do delayed-in audio edits #define ED_TRANSCAP_CAN_DELAY_AUDIO_OUT ED_BASE+108L // transport can do delayed-out audio edits #define ED_TRANSCAP_FWD_VARIABLE_MAX ED_BASE+109L // max forward speed (multiple of play speed) // in pdblValue #define ED_TRANSCAP_REV_VARIABLE_MAX ED_BASE+110L // max reverse speed (multiple of play speed) in // pdblValue #define ED_TRANSCAP_NUM_AUDIO_TRACKS ED_BASE+111L // returns number of audio tracks #define ED_TRANSCAP_LTC_TRACK ED_BASE+112L // returns track number of LTC timecode track. // ED_ALL means no dedicated timecode track #define ED_TRANSCAP_NEEDS_TBC ED_BASE+113L // device’s output not stable #define ED_TRANSCAP_NEEDS_CUEING ED_BASE+114L // device must be cued prior to performing edit #define ED_TRANSCAP_CAN_INSERT ED_BASE+115L #define ED_TRANSCAP_CAN_ASSEMBLE ED_BASE+116L #define ED_TRANSCAP_FIELD_STEP ED_BASE+117L // device responds to Frame Advance command by // advancing one field #define ED_TRANSCAP_CLOCK_INC_RATE ED_BASE+118L // VISCA command - keep for compatibility #define ED_TRANSCAP_CAN_DETECT_LENGTH ED_BASE+119L #define ED_TRANSCAP_CAN_FREEZE ED_BASE+120L #define ED_TRANSCAP_HAS_TUNER ED_BASE+121L #define ED_TRANSCAP_HAS_TIMER ED_BASE+122L #define ED_TRANSCAP_HAS_CLOCK ED_BASE+123L // IAMExtTransport Media States #define ED_MEDIA_SPIN_UP ED_BASE+130L #define ED_MEDIA_SPIN_DOWN ED_BASE+131L #define ED_MEDIA_UNLOAD ED_BASE+132L // IAMExtTransport Modes #define ED_MODE_PLAY ED_BASE+200L #define ED_MODE_STOP ED_BASE+201L #define ED_MODE_FREEZE ED_BASE+202L // really "pause" #define ED_MODE_THAW ED_BASE+203L #define ED_MODE_FF ED_BASE+204L #define ED_MODE_REW ED_BASE+205L #define ED_MODE_RECORD ED_BASE+206L #define ED_MODE_RECORD_STROBE ED_BASE+207L #define ED_MODE_STEP ED_BASE+208L // same as "jog" #define ED_MODE_SHUTTLE ED_BASE+209L #define ED_MODE_EDIT_CUE ED_BASE+210L #define ED_MODE_VAR_SPEED ED_BASE+211L #define ED_MODE_PERFORM ED_BASE+212L // returned status only #define ED_MODE_LINK_ON ED_BASE+280L #define ED_MODE_LINK_OFF ED_BASE+281L // IAMTimecodeReader/Generator/Display defines // // Timecode Generator Mode params and values: // #define ED_TCG_TIMECODE_TYPE ED_BASE+400L // can be one of the following: #define ED_TCG_SMPTE_LTC ED_BASE+401L #define ED_TCG_SMPTE_VITC ED_BASE+402L #define ED_TCG_MIDI_QF ED_BASE+403L #define ED_TCG_MIDI_FULL ED_BASE+404L #define ED_TCG_FRAMERATE ED_BASE+405L // can be one of the following: #define ED_FORMAT_SMPTE_30 ED_BASE+406L #define ED_FORMAT_SMPTE_30DROP ED_BASE+407L #define ED_FORMAT_SMPTE_25 ED_BASE+408L #define ED_FORMAT_SMPTE_24 ED_BASE+409L #define ED_TCG_SYNC_SOURCE ED_BASE+410L // can be one of the following: #define ED_TCG_VIDEO ED_BASE+411L #define ED_TCG_READER ED_BASE+412L #define ED_TCG_FREE ED_BASE+413L #define ED_TCG_REFERENCE_SOURCE ED_BASE+414L // can have one these values: // ED_TCG_FREE || ED_TCG_READER // (for regen/jamsync) // TimeCodeReader Mode params and values: #define ED_TCR_SOURCE ED_BASE+416L // can be one of the following: // ED_TCG (already defined) #define ED_TCR_LTC ED_BASE+417L #define ED_TCR_VITC ED_BASE+418L #define ED_TCR_CT ED_BASE+419L // Control Track // TimeCode Display Mode params and values: // #define ED_TCD_SOURCE ED_BASE+422L // can be one of the following: #define ED_TCR ED_BASE+423L #define ED_TCG ED_BASE+424L #define ED_TCD_SIZE ED_BASE+425L // can be one of the following: #define ED_SMALL ED_BASE+426L #define ED_MED ED_BASE+427L #define ED_LARGE ED_BASE+428L #define ED_TCD_POSITION ED_BASE+429L // can be one of the following: #define ED_TOP 0x0001 #define ED_MIDDLE 0x0002 #define ED_BOTTOM 0x0004 // or’d with #define ED_LEFT 0x0100 #define ED_CENTER 0x0200 #define ED_RIGHT 0x0400 #define ED_TCD_INTENSITY ED_BASE+436L // can be one of the following: #define ED_HIGH ED_BASE+437L #define ED_LOW ED_BASE+438L #define ED_TCD_TRANSPARENCY ED_BASE+439L // 0-4, 0 is opaque #define ED_TCD_INVERT ED_BASE+440L // OATRUE=black on white // OAFALSE=white on black // IAMExtTransport defines // // Transport status, params and values // // IAMExtTransport Status items and and values: #define ED_MODE ED_BASE+500L // see ED_MODE_xxx values above #define ED_ERROR ED_BASE+501L #define ED_LOCAL ED_BASE+502L #define ED_RECORD_INHIBIT ED_BASE+503L #define ED_SERVO_LOCK ED_BASE+504L #define ED_MEDIA_PRESENT ED_BASE+505L #define ED_MEDIA_LENGTH ED_BASE+506L #define ED_MEDIA_SIZE ED_BASE+507L #define ED_MEDIA_TRACK_COUNT ED_BASE+508L #define ED_MEDIA_TRACK_LENGTH ED_BASE+509L #define ED_MEDIA_SIDE ED_BASE+510L #define ED_MEDIA_TYPE ED_BASE+511L // can be one of the following: #define ED_MEDIA_VHS ED_BASE+512L #define ED_MEDIA_SVHS ED_BASE+513L #define ED_MEDIA_HI8 ED_BASE+514L #define ED_MEDIA_UMATIC ED_BASE+515L #define ED_MEDIA_DVC ED_BASE+516L #define ED_MEDIA_1_INCH ED_BASE+517L #define ED_MEDIA_D1 ED_BASE+518L #define ED_MEDIA_D2 ED_BASE+519L #define ED_MEDIA_D3 ED_BASE+520L #define ED_MEDIA_D5 ED_BASE+521L #define ED_MEDIA_DBETA ED_BASE+522L #define ED_MEDIA_BETA ED_BASE+523L #define ED_MEDIA_8MM ED_BASE+524L #define ED_MEDIA_DDR ED_BASE+525L #define ED_MEDIA_OTHER ED_BASE+526L #define ED_MEDIA_CLV ED_BASE+527L #define ED_MEDIA_CAV ED_BASE+528L #define ED_MEDIA_POSITION ED_BASE+529L #define ED_LINK_MODE ED_BASE+530L // OATRUE if transport controls // are linked to graph's RUN, // STOP, and PAUSE methods // IAMExtTransport Basic Parms #define ED_TRANSBASIC_TIME_FORMAT ED_BASE+540L // can be one of the following: #define ED_FORMAT_MILLISECONDS ED_BASE+541L #define ED_FORMAT_FRAMES ED_BASE+542L #define ED_FORMAT_REFERENCE_TIME ED_BASE+543L #define ED_FORMAT_HMSF ED_BASE+547L #define ED_FORMAT_TMSF ED_BASE+548L #define ED_TRANSBASIC_TIME_REFERENCE ED_BASE+549L // can be one of the following: #define ED_TIMEREF_TIMECODE ED_BASE+550L #define ED_TIMEREF_CONTROL_TRACK ED_BASE+551L #define ED_TIMEREF_INDEX ED_BASE+552L #define ED_TRANSBASIC_SUPERIMPOSE ED_BASE+553L // enable/disable onscreen display #define ED_TRANSBASIC_END_STOP_ACTION ED_BASE+554L // can be one of: ED_MODE_STOP | // ED_MODE_REWIND | ED_MODE_FREEZE #define ED_TRANSBASIC_RECORD_FORMAT ED_BASE+555L // can be one of the following: #define ED_RECORD_FORMAT_SP ED_BASE+556L #define ED_RECORD_FORMAT_LP ED_BASE+557L #define ED_RECORD_FORMAT_EP ED_BASE+558L #define ED_TRANSBASIC_STEP_COUNT ED_BASE+559L #define ED_TRANSBASIC_STEP_UNIT ED_BASE+560L // can be one of the following: #define ED_STEP_FIELD ED_BASE+561L #define ED_STEP_FRAME ED_BASE+562L #define ED_STEP_3_2 ED_BASE+563L #define ED_TRANSBASIC_PREROLL ED_BASE+564L #define ED_TRANSBASIC_RECPREROLL ED_BASE+565L #define ED_TRANSBASIC_POSTROLL ED_BASE+566L #define ED_TRANSBASIC_EDIT_DELAY ED_BASE+567L #define ED_TRANSBASIC_PLAYTC_DELAY ED_BASE+568L #define ED_TRANSBASIC_RECTC_DELAY ED_BASE+569L #define ED_TRANSBASIC_EDIT_FIELD ED_BASE+570L #define ED_TRANSBASIC_FRAME_SERVO ED_BASE+571L #define ED_TRANSBASIC_CF_SERVO ED_BASE+572L #define ED_TRANSBASIC_SERVO_REF ED_BASE+573L // can be one of the following: #define ED_REF_EXTERNAL ED_BASE+574L #define ED_REF_INPUT ED_BASE+575L #define ED_REF_INTERNAL ED_BASE+576L #define ED_REF_AUTO ED_BASE+577L #define ED_TRANSBASIC_WARN_GL ED_BASE+578L #define ED_TRANSBASIC_SET_TRACKING ED_BASE+579L // can be one of the following: #define ED_TRACKING_PLUS ED_BASE+580L #define ED_TRACKING_MINUS ED_BASE+581L #define ED_TRACKING_RESET ED_BASE+582L #define ED_TRANSBASIC_SET_FREEZE_TIMEOUT ED_BASE+583L #define ED_TRANSBASIC_VOLUME_NAME ED_BASE+584L #define ED_TRANSBASIC_BALLISTIC_1 ED_BASE+585L // space for proprietary data #define ED_TRANSBASIC_BALLISTIC_2 ED_BASE+586L #define ED_TRANSBASIC_BALLISTIC_3 ED_BASE+587L #define ED_TRANSBASIC_BALLISTIC_4 ED_BASE+588L #define ED_TRANSBASIC_BALLISTIC_5 ED_BASE+589L #define ED_TRANSBASIC_BALLISTIC_6 ED_BASE+590L #define ED_TRANSBASIC_BALLISTIC_7 ED_BASE+591L #define ED_TRANSBASIC_BALLISTIC_8 ED_BASE+592L #define ED_TRANSBASIC_BALLISTIC_9 ED_BASE+593L #define ED_TRANSBASIC_BALLISTIC_10 ED_BASE+594L #define ED_TRANSBASIC_BALLISTIC_11 ED_BASE+595L #define ED_TRANSBASIC_BALLISTIC_12 ED_BASE+596L #define ED_TRANSBASIC_BALLISTIC_13 ED_BASE+597L #define ED_TRANSBASIC_BALLISTIC_14 ED_BASE+598L #define ED_TRANSBASIC_BALLISTIC_15 ED_BASE+599L #define ED_TRANSBASIC_BALLISTIC_16 ED_BASE+600L #define ED_TRANSBASIC_BALLISTIC_17 ED_BASE+601L #define ED_TRANSBASIC_BALLISTIC_18 ED_BASE+602L #define ED_TRANSBASIC_BALLISTIC_19 ED_BASE+603L #define ED_TRANSBASIC_BALLISTIC_20 ED_BASE+604L // consumer VCR items #define ED_TRANSBASIC_SETCLOCK ED_BASE+605L #define ED_TRANSBASIC_SET_COUNTER_FORMAT ED_BASE+606L // uses time format flags #define ED_TRANSBASIC_SET_COUNTER_VALUE ED_BASE+607L #define ED_TRANSBASIC_SETTUNER_CH_UP ED_BASE+608L #define ED_TRANSBASIC_SETTUNER_CH_DN ED_BASE+609L #define ED_TRANSBASIC_SETTUNER_SK_UP ED_BASE+610L #define ED_TRANSBASIC_SETTUNER_SK_DN ED_BASE+611L #define ED_TRANSBASIC_SETTUNER_CH ED_BASE+612L #define ED_TRANSBASIC_SETTUNER_NUM ED_BASE+613L #define ED_TRANSBASIC_SETTIMER_EVENT ED_BASE+614L #define ED_TRANSBASIC_SETTIMER_STARTDAY ED_BASE+615L #define ED_TRANSBASIC_SETTIMER_STARTTIME ED_BASE+616L #define ED_TRANSBASIC_SETTIMER_STOPDAY ED_BASE+617L #define ED_TRANSBASIC_SETTIMER_STOPTIME ED_BASE+618L // IAMExtTransport video parameters #define ED_TRANSVIDEO_SET_OUTPUT ED_BASE+630L // can be one of the following: #define ED_E2E ED_BASE+631L #define ED_PLAYBACK ED_BASE+632L #define ED_OFF ED_BASE+633L #define ED_TRANSVIDEO_SET_SOURCE ED_BASE+634L // IAMExtTransport audio parameters #define ED_TRANSAUDIO_ENABLE_OUTPUT ED_BASE+640L // can be the following: #define ED_AUDIO_ALL 0x10000000 // or any of the following OR'd together #define ED_AUDIO_1 0x0000001L #define ED_AUDIO_2 0x0000002L #define ED_AUDIO_3 0x0000004L #define ED_AUDIO_4 0x0000008L #define ED_AUDIO_5 0x0000010L #define ED_AUDIO_6 0x0000020L #define ED_AUDIO_7 0x0000040L #define ED_AUDIO_8 0x0000080L #define ED_AUDIO_9 0x0000100L #define ED_AUDIO_10 0x0000200L #define ED_AUDIO_11 0x0000400L #define ED_AUDIO_12 0x0000800L #define ED_AUDIO_13 0x0001000L #define ED_AUDIO_14 0x0002000L #define ED_AUDIO_15 0x0004000L #define ED_AUDIO_16 0x0008000L #define ED_AUDIO_17 0x0010000L #define ED_AUDIO_18 0x0020000L #define ED_AUDIO_19 0x0040000L #define ED_AUDIO_20 0x0080000L #define ED_AUDIO_21 0x0100000L #define ED_AUDIO_22 0x0200000L #define ED_AUDIO_23 0x0400000L #define ED_AUDIO_24 0x0800000L #define ED_VIDEO 0x2000000L // for Edit props below #define ED_TRANSAUDIO_ENABLE_RECORD ED_BASE+642L #define ED_TRANSAUDIO_ENABLE_SELSYNC ED_BASE+643L #define ED_TRANSAUDIO_SET_SOURCE ED_BASE+644L #define ED_TRANSAUDIO_SET_MONITOR ED_BASE+645L // Edit Property Set-related defs // The following values reflect (and control) the state of an // edit property set #define ED_INVALID ED_BASE+652L #define ED_EXECUTING ED_BASE+653L #define ED_REGISTER ED_BASE+654L #define ED_DELETE ED_BASE+655L // Edit property set parameters and values #define ED_EDIT_HEVENT ED_BASE+656L // event handle to signal event // completion #define ED_EDIT_TEST ED_BASE+657L // returns OAFALSE if filter thinks // edit can be done, OATRUE if not #define ED_EDIT_IMMEDIATE ED_BASE+658L // OATRUE means start put the // device into edit mode (editing // "on the fly") immediately upon // execution of Mode(ED_MODE_EDIT_CUE) #define ED_EDIT_MODE ED_BASE+659L // can be one of the following values: #define ED_EDIT_MODE_ASSEMBLE ED_BASE+660L #define ED_EDIT_MODE_INSERT ED_BASE+661L #define ED_EDIT_MODE_CRASH_RECORD ED_BASE+662L #define ED_EDIT_MODE_BOOKMARK_TIME ED_BASE+663L // these two are for #define ED_EDIT_MODE_BOOKMARK_CHAPTER ED_BASE+664L // laserdisks #define ED_EDIT_MASTER ED_BASE+666L // OATRUE causes device // not to synchronize #define ED_EDIT_TRACK ED_BASE+667L // can be one of the following possible OR'd values: // ED_VIDEO, ED_AUDIO_1 thru ED_AUDIO_24 (or ED_AUDIO_ALL) #define ED_EDIT_SRC_INPOINT ED_BASE+668L // in current time format #define ED_EDIT_SRC_OUTPOINT ED_BASE+669L // in current time format #define ED_EDIT_REC_INPOINT ED_BASE+670L // in current time format #define ED_EDIT_REC_OUTPOINT ED_BASE+671L // in current time format #define ED_EDIT_REHEARSE_MODE ED_BASE+672L // can be one of the following possible values: #define ED_EDIT_BVB ED_BASE+673L // means rehearse the edit with // "black-video-black" #define ED_EDIT_VBV ED_BASE+674L #define ED_EDIT_VVV ED_BASE+675L #define ED_EDIT_PERFORM ED_BASE+676L // means perform the edit with no // rehearsal. // Set this property to OATRUE to kill the edit if in progress #define ED_EDIT_ABORT ED_BASE+677L // how long to wait for edit to complete #define ED_EDIT_TIMEOUT ED_BASE+678L // in current time format // This property causes the device to seek to a point specified by // ED_EDIT_SEEK_MODE (see below). NOTE: Only one event at a time can seek. #define ED_EDIT_SEEK ED_BASE+679L // OATRUE means do it now. #define ED_EDIT_SEEK_MODE ED_BASE+680L //possible values: #define ED_EDIT_SEEK_EDIT_IN ED_BASE+681L // seek to edit's inpoint #define ED_EDIT_SEEK_EDIT_OUT ED_BASE+682L // seek to edit's outpoint #define ED_EDIT_SEEK_PREROLL ED_BASE+683L // seek to edit's // inpoint-preroll #define ED_EDIT_SEEK_PREROLL_CT ED_BASE+684L // seek to preroll point // using control track (used for tapes with // discontinuoustimecode before edit point: seek // to inpoint using timecode, then backup to // preroll point using control track) #define ED_EDIT_SEEK_BOOKMARK ED_BASE+685L // seek to bookmark // // Some error codes: // // device could be in local mode #define ED_ERR_DEVICE_NOT_READY ED_BASE+700L #endif // __EDEVDEFS__ // eof edevdefs.h