=================================================================
        SILOS 2001 Verilog HDL Toolbox 
	*** Demonstration Version ***

	WITH  Examples from the book:

"Verilog HDL: A Guide to Digital Design and Synthesis",
                  Second Edition
		by Samir Palnitkar

                      Email:
               s_palnitkar@yahoo.com
              sspalnitkar@hotmail.com

=================================================================

*******************************************************************
	Important Note:
	Silos is updated and improved several times each year. 
	If you wish you may download the latest demonstration
	version of Silos from Simucad's web site, http://www.simucad.com.
*******************************************************************

SPECIAL NOTICES:

1)	This Silos 2001 Demonstration Program is designed to be used for 
	demonstration purposes only.  
	The program has specific limitations to prevent usage for commercial
	purposes.  There are features and capabilities which are intentionally 
	reduced or disabled.

	The demonstration version is limited to 200 gates and 350 lines of 
	behavioral code.

2)  	The Silos 2001 User's Manual is now available in PDF format
	in the "doc" subdirectory of the Silos 2001 CD and the Simucad
	web site, http://www.simucad.com.  

*******************************************************************


*******************************************************************

Silos 2001 is a graphical framework that integrates tools for the Verilog HDL designer.
The tools featured in the framework are:

	- Code Coverage;
	- Finite State Machine Editor;
	- Chromacoded Editor;
	- Help System;
	- Silos Simulator;
	- Hierarchy Browser;
	- Waveform Viewer.


This demonstration version of Silos 2001 supports features from the IEEE 1364-2001
Verilog Hardware Description Language Standard. This demonstration version of Silos 2001 
also supports the Programming Language Interface (PLI), and the Standard Delay File (SDF) 
format.


SYSTEM REQUIREMENTS: 
-------------------------

1) 	At least 16 MB of available memory is recommended.  Memory usage 
	varies depending on the design.  

2)	The installation requires less than 50 Mb of disk space.  
	The amount of disk needed during simulation will vary based 
	on the size of the circuit and its activity. 

3)      Windows 2000, Windows XP, Windows ME, Windows NT (version 4.0 or higher).



INSTALLATION INSTRUCTIONS:
-------------------------

1)	Start your PC and get into Windows. 
	(you already did this step)

2)	Insert CD-ROM provided into the CD-ROM drive (D:) 
	and open file "D:\README.TXT" to read the installation 
	instructions. (You have completed this step also).

3)	Double-click on "D:\SETUP.EXE"

5)	Answer the questions when prompted by the 
	SILOS 2001 installation program. This will install
        SILOS 2001 software. See the README.TXT file in the
        SILOS 2001 installation directory for instructions on
        running the simulator.

6)	Copy "D:\VERILOG_BOOK_EXAMPLES" directory to a desired location
        on your computer's hard drive (C:). This directory contains Verilog
        source for examples from the book. Remember to make this
        directory writable.

7)	You are now ready to run the simulator with the book examples.
        To run an example from the Verilog book, simply go into
        the "VERILOG_BOOK_EXAMPLES" directory on your hard drive (C:) and 
        follow the instructions in the README.TXT file.


*******************
IMPORTANT NOTICE
*******************


All versions of Silos, including this limited demonstration license, 
shall be treated as the confidential property of SIMUCAD, Inc.

This limited demonstration license is granted by SIMUCAD, Inc. and is
subject to the following conditions and limitations:

1)      There are no restrictions on making copies of this demonstration
	version of Silos (software and documentation).

2)      No person will decompile or disassemble this program or by any
	other similar means of reverse engineering undertake to discover
	the ideas, information and algorithms embodied in this program.

3)      This license is granted solely for the purpose of evaluating 
	SSE and use of this license for commercial purposes is
	strictly forbidden.



WARRANTY:
---------

SIMUCAD makes no warranty of any kind, express or implied including,
without limitation, any warranties of merchantability and/or fitness
for a particular purpose. SIMUCAD shall not be liable for any damages, 
whether direct, indirect, special or consequential arising from a
failure of the program to operate in the manner desired by the user.
SIMUCAD shall not be liable for any damage to any property that may
be caused directly or indirectly by the software or duplication of
the software.


IN NO EVENT WILL SIMUCAD BE LIABLE FOR ANY DAMAGES INCLUDING ANY
LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF INABILITY TO USE THE PROGRAM, OR FOR ANY
OTHER CLAIM BY ANY OTHER PARTY.

COPYRIGHT NOTICES:
------------------

SIMUCAD and SILOS are registered trademarks of and SILOS III, Silos 2001, HyperFault,
SILOS II, SILOS, P/C-SILOS are trademarks of SIMUCAD, Inc.

Verilog is a registered trademark of Cadence Design Systems Inc.  
Other company and product names may be trademarks of the respective 
company with which they are associated.